Automatic woodworking edge banding machine

High speed Edge Banding Machine RFB865Parameters:ModelRFB465Panel length≥120mmPanel width≥60mmPanel thickness10-60mmEdgeband thickness0.3-3mmFeeding speed13-22m/minIn-put voltage380V.In-put frequency50HZ.3PTotal power8.5KWRequired air pressure0.6MpaOverall dimensions(L*W*H)4080*900*1560mmStandard Configuration:1. Gluing sy

Featured Products

High speed Edge Banding Machine RFB865
Automatic Woodworking Edge Banding Machine


Automatic Woodworking Edge Banding Machine
Parameters:
ModelRFB465
Panel length≥120mm
Panel width≥60mm
Panel thickness10-60mm
Edgeband thickness0.3-3mm
Feeding speed13-22m/min
In-put voltage380V.
In-put frequency50HZ.3P
Total power8.5KW
Required air pressure0.6Mpa
Overall dimensions(L*W*H)4080*900*1560mm
Standard Configuration:
Automatic Woodworking Edge Banding Machine
1. Gluing system
In gluing system, the glue box is coated with Teflon, which makes the box cleaning easier. The glue box has the temperature maintaining function and can shorten heating time and avoid the glue carbonization. The machine can use the high temperature EVA hot melt glue and can deliver the glue by spiral structure. The glue box size is 200*150*450mm.

Automatic Woodworking Edge Banding Machine

2. Feeding and edge cutting system
When the single unit feeding system can be used to load the strip (optional) and roller type edge bands and the edge band thickness can be 0.4~3mm. If the single work unit can not meet the working requirements, the 2-10 feeding units can be selected. The edge cutting cylinder is controlled by double solenoid valves.

Automatic Woodworking Edge Banding Machine
3. Press system
The precise large press wheel and glue wheel can work together to ensure the press effect. The small press wheel are composed of 2 upper and lower cone wheels and 1 straight wheel. The upper and lower cone wheels can ensure the good press effect. The large and small press wheels are controlled by the separate pressure control valve.
Optional: One large wheel can be equipped with 5 small wheels.

Automatic Woodworking Edge Banding Machine

Optional:
1. Misting station
A. Before pre-milling: Prevent the upper and lower surface from sticking with glue, improve the edge banding effect.
B. Before buffing: Improve the cleaning effect of the plate.

Automatic Woodworking Edge Banding Machine
2. Pneumatic Tool Alignment System
1). Input the new thickness of edgeband, then it can change the edgeband automatically.
2). Position location of cylinder, work with 0.4-3mm edgeband.
3). The manual adjustment is no longer required. The worker only needs to place the corresponding edgebands at the entrainment position. Easy to operate.

Automatic Woodworking Edge Banding Machine

3. Hot air blowers
Brings high gloss shine back to PVC banding after the 3mm scrape station.
Blow after the scrape station, make buffing effect better.

Automatic Woodworking Edge Banding Machine
Automatic Woodworking Edge Banding Machine
Automatic Woodworking Edge Banding Machine

FAQ:

Q1:How to choose the right sliding table saw?

A: We can recommend you right models based your personal requirment if you do not know how to choose. 
 

Q2:What is the working table length of panel saw?

A: Usually is 1500-3800mm. Also It is changeable according to clients requests.
 

Q3:How to ensure the safety?
A:There are the overload and overheat protection that ensure the safety of working people

 

Q4:How long the table saw machine can be used?

A: It depends how you use your table saw, if use it in good maintenance, at least 8-10 years.


















 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours