| Description | Low cost routing gsm router 4g caller ID |
| Item no. | 390-4G-EC25J |
| Module | Quectel EC25-J |
| Frequency | FDD: B1/B3/B8/B18/B19/B26 |
| TDD: B41 | |
| WCDMA: B1/B6/B8/B19 | |
| LTE Data | FDD: Max 150Mbps (DL)/Max 50Mbps (UL) |
| TDD: Max 130Mbps (DL)/Max 30Mbps (UL) | |
| UMTS Data | DC-HSDPA: Max 42Mbps (DL) |
| HSUPA: Max 5.76Mbps (UL) | |
| WCDMA: Max 384Kbps (DL)/Max 384Kbps (UL) | |
| GSM Data | EDGE: Max 296Kbps (DL)/Max 236.8Kbps (UL) |
| GPRS: Max 107Kbps (DL)/Max 85.6Kbps (UL) | |
| Sensitivity | LTE B1: -101.5dBm (10M) |
| LTE B3: -101.5dBm (10M) | |
| LTE B8: -101dBm (10M) | |
| LTE B18: -101.7dBm (10M) | |
| LTE B19: -101.4dBm (10M) | |
| LTE B26: -101.5dBm (10M) | |
| LTE B41: -99dBm (10M) | |
| WCDMA B1: -110dBm | |
| WCDMA B6 -110.5dBm | |
| WCDMA B8: -110.5dBm | |
| WCDMA B19: -110.5dBm | |
| Output Power | Class 3 (24dBm+1/-3dB) for WCDMA bands |
| Class 3 (23dBm±2dB) for LTE-FDD bands | |
| Class 3 (23dBm±2dB) for LTE-TDD bands | |
| LTE Cat | LTE Cat 4 module optimized for M2M and IoT applications |
| Protocols | TCP/UDP/PPP/FTP/HTTP/NTP/PING/QMI/ |
| CMUX*/HTTPS*/SMTP*/MMS*/FTPS*/SMTPS*/ | |
| SSL*/FILE* | |
| Feature refinements | supports DFOTA*, eCall* and DTMF |
| Speech Codec | HR/FR/EFR/AMR/AMR-WB |
| Echo Arithmetic | Echo Cancellation/Noise Suppression |
| VoLTE | Digital Audio and VoLTE |
| Interfaces | UART × 2 : Main UART and Debug UART |
| USB 2.0 with High Speed up to 480Mbps | |
| 1.8V/3.0V (U)SIM Interface | |
| Digital Audio through PCM Interface | |
| ADC × 2 | |
| SDIO × 2 (for Wi-Fi and SD card) | |
| UART/PCM Interfaces for BT4.0 Function | |
| Audio Playback/Audio Recording | |
| USB Serial Driver | Windows 7/8/8.1/10 or Windows CE 5.0/6.0/7.0* |
| Linux 2.6/3.x/4.1~4.14 | |
| RIL Driver | Android 4.x/5.x/6.x/7.x/8.x |
| NDIS Driver | Windows 7/8/8.1/10 |
| ECM Driver* | Linux 2.6/3.x/4.1~4.14 |
| Gobinet Driver | Linux 2.6/3.x/4.1~4.14 |
| Linux qmi wwan Driver | 3.x (3.4 or later)/4.1~4.14 |
| Consumption | Power off: 20uA |
| Sleep Typ: 3mA | |
| Idle: 22mA | |
| Display | STN Black& White |
| Resolution 128*64 pixels | |
| Adapter | EU, UK, USA, AU adapter etc. optional |
| SIM connection | 1.8V or 3.0V |
| Power Supply | Input 100-220V, |
| Output | 12V 1A or 5V 1A |
| Battery | 600mAh, 800mAh, 1000mAh, 2000mAh |
| SIM card | Mini sim(2FF); Single or dual sim card optional; |
| Color | Black or white or OEM; |
| LCD Size: | 67*30mm |
| Antenna | 3m antenna or small rubber antenna |
| Caller ID | DTMF or FSK or both |
| Dimension | Device: 153/98/31mm |
| Pack Box: 181/123/81mm | |
| Package | Device*1; Adaptor*1; Battery(built in)*1; Straight Cable*1; User manual*1; Antenna*1pc; |
| Weight | 0.40Kg or 0.42Kg |
- 2 RJ-11 ports (1 fxo for pstn line and 1 fxs port);
- Auto-select low cost routing (LCR function);
- When 4G is unavailable,calls will be forced to dial out from PSTN;
- When not connecting to PSTN line, 4G will provide the forced dial-out function;
- Routing between PSTN and 4G, user can program the numbers need to dial through 4G or PSTN;
- Automatic Call Routing (ACR) dialler;
- Answering a 4G Phone Call by normal telephone;
- Call divert (Follow Me);
- Transit between PSTN and 4G Network;
- Use 4G as a PSTN Line;
1.LCD Display 03 ?
A: No signal or the signal is too weak, check the antenna and install it again;
2.LCD Display SIM Error?
A: Sim card is bad or communication module is bad, replace new sim card or wipe contact surface and install the SIM card again;
Or replace communication module;
3.LCD always display "IN USE"?
A: Integrated circuit board bad or telephone bad, replace new integrated circuit board or check phone line and replace new
telephone;
4.How to back to factory default?
A:Input *00#000# then the unit will be back to factory default;
5.How to change IMEI number?
A:Input *00#035#IMEI# then you can change the IMEI number in the unit as you required;
6.How to change date and time?
A:Input *00#036#YYMMDDHHMMSS# then you can see new date and time display on LCD;
7.How to set PIN code?
A:Input *00#010#0#pin code# then the pin code of the unit will be changed as you required;
8.How to block all calls come in?
A:Input *00#011#1# then no call can come in;
9.How to release all call can come in?
A:Input *00#011#0# then all calls can come in;
10.How to adjust the volue?
A:Input *00#030#A*BB# according to your volume requirement to adjust the volume;
11.How to set IP number?
A:Input *00#050#IP# then the unit will auto add IP number before the number you want to dial;
12.How to change time zone?
A:Input *00#037#time zone number# then the unit will display time to desired time zone time;
Q. Is sample order available?
Yes, it's available upon request;
Q. How long do you need to prepare sample ?
Depending on different products, it may take 3-5 days;
Q. How long delivery time for formal order?
Generally speaking it'll take about 20-30 days subject to your order quantity;
Q. What's your Order MOQ?
For sample test, can make 1pc at least;
For standard model, usually MOQ is 1k per model.;
Q. What payment terms do you accept?
For samples, we accept WESTERN UNION, MoneyGram or BANK T/T in advance;
For formal order, 30% deposit and balance after goods ready but before shipment;
Q. How much will the express delivery cost for the sample?
The express delivery cost depends on the sample quantity, weight, carton measurement
and which country you would like to send;
Q. How to ship the goods to us?
For samples order, usually delivered by carrier like DHL, TNT, FEDEX etc.;
For small order, can delivered by air, also can by courier;
For formal order, usually delivered by sea in order to save transportation cost;
Q. Can we have our logo to be printed on the units or packaging?
Yes for sure, but MOQ request is 1000pcs/model/order;
Q. How about warranty?
Our warranty is one year, and we can repair the defective units if you can return it back; Or if you have your
own service after sales then we can offer you spare parts according to your order quantity; Our defective rate is
about 0.1-0.3%;
